AQTR 2006 - FInal program

Thursday, May 25
Students Cultural House, P-ta. Lucian Blaga nr. 1-3, Cluj-Napoca

Thu, May 25
15:00 - 19:00

Registration

Thu, May 25
16:00 - 19:00

Room: Europa

Plenary session I

Chairs: Liviu Miclea, Ioan Stoian

Speakers:

 

Towards a New Generation of Control Systems
I.
Dumitrache, (Politechnica University of Bucharest, Romania)

 

Evolutions in Full-Field Optoelectronic Coherent Metrology as Applied in
Numerical Model validation, Microscopy and Vibroacoustics

D. N. Borza, (INSA Rouen, France)

 

Positioning and Navigation of Underwater Vehicles
J. Battle (University of Girona, Spain)

Thu, May 25
19:00

Dinner

Friday, May 26
Technical University of Cluj-Napoca, 26 - 28 Baritiu Street

Fri, May 26
8:30 - 11:00

Registration

Fri, May 26
8:30 - 11:30      

Tutorials

T1. Dan Borza - INSA Rouen

Room 40

Evolutions in Full-Field Optoelectronic Coherent Metrology as Applied in
Numerical Model validation, Microscopy and Vibroacoustics

T2. Yervant Zorian - Virage Logic

Room 356

Design for Yield and Reliability

T3. Vladimir Rasvan - University of Craiova

Room F

Three lectures on dissipativeness

 

Fri, May 26
12:00 - 13:30

Room 40

Session S1 - sI
Advanced control, modeling and simulation

Chairs
Robin De Keyser, Vladimir Rasvan, Eva Dulf

S1-sI-1

Invariance Properties in the Dynamics of Positive Linear Systems
O. Pastravanu, M.-H. Matcovschi (Technical University "Gh. Asachi" of Iasi, Romania)

S1-sI-2

The Design of Control Systems for Hydraulic Turbines
M. Vinatoru,
E. Iancu, (University of Craiova, Romania)

S1-sI-3

Subspace Identification of Pure Stochastic Systems
D. Sendrescu, D.  Popescu, E. Bobasu, E. Petre, (
University of Craiova, Romania)

S1-sI-4

Activating Paralyzed Muscles using Adaptive Control and a Neuroprosthetic Technique
C. Ionescu, R. De Keyser, (
Ghent University, Belgium)

S1-sI-5

An Approach to Control the Blood Glucose Level in Diabetic Patients
C. Ionescu,
S. Zlate, R. De Keyser, (Ghent University, Belgium)

S1-sI-6

Optimizing Control Algorithm for Soft Sun-Trackers
D. Marinescu, C. Marinescu, (
Transilvania University of Brasov, Romania)

 

Fri, May 26
12:00 - 13:30

Room 41

Session S2 - sI
Testing and Quality

Chairs
Yervant Zorian, Ovidiu Ghiran, Mihai Hulea

S2-sI-1

PDPT Framework – Creation, Operation and Testing Phase of Building Information System with Wireless Connected Mobile Device
O. Krejcar, (Technical University of Ostrava, Czech Republic)

S2-sI-2

Pseudo-Random Number Generator RC4 Period Improvement
A. G. Chefranov, T.A. Mazurova, (Eastern
Mediterranean University, Tagnarog University, Rusia)

S2-sI-3

Model Based Testing of Real-Time Embedded Components
O. Kone, (
University of Toulouse IRIT/CNRS, France)

S2-sI-4

Commands Synthesis in Fault Conditions Application for Flight Control System
E. Iancu, M. Vinatoru, (University of Craiova, Romania)

S2-sI-5

Expert System for Quality Cost Planning, Monitoring and Control
S. Brad, M. Fulea, B. Mocan, (Technical
University of Cluj-Napoca, Romania)

S2-sI-6

Reconfiguration of the Backtrace Algorithm Implemented in HW to Speed up a Vector Generation Process
M. Štáva, O. Novák, (
Czech Technical University in Prague, Czech Republic)

 

Fri, May 26
12:00 - 13:30

Room 356

Session S3 - sI
Measurement and Quality of environment

Chairs
Dan Borza, Gabriel Vladut, Cristina Schiau

S3-sI-1

Digital Calibration Methodology Applied to a Sensor Microsystem
M. Pastre, M. Kayal, (Ecole Polytechnique Fédérale de
Lausanne, Switzerland)

S3-sI-2

Improved Linearity Active Resistor with Increased Frequency Response for VLSI Applications
C. Popa, (Faculty of Electronics, Telecommunications and Information Technology
Bucharest, Romania)

S3-sI-3

Data Acquisition Equipment for Measurement of the Parameters for Electric Energy Quality
1G. Vladut, 2I. Purcaru, 3P.M. Nicolae , (1IPA CIFATT
Craiova, 2SC VIG Impex SRL Craiova, 3University of Craiova, Romania)

S3-sI-4

Optical Metrology Testing and Numerical Model Validation of Static
Deformations and Stress Concentrations of Piezoelectric Actuators

D. N. Borza, D. Lemosse, E. Pagnacco, (INSA Rouen, France)

S3-sI-5

Stream Manager, an Answer to Academic Project Policy
J.-M. Galličre, G. Cathebras, (
University of Montpellier, France)

 

Fri, May 26
12:00 - 13:30

Room F

Session S4 - sI
Robotics and CIM

Chairs
Manfred Husty, Lluis Pacheco, Radu Robotin

S4-sI-1

Instrumented Compliance for Tendon Driven Rotary Robot Joint
K. Gilbank, D. Necsulescu,
E. Petriu, (University of Ottawa, Canada)

S4-sI-2

Stiffness Performance of Multibody Robotic Systems
G. Carbone, (
University of Cassino, Italy)

S4-sI-3

Experimental Modeling and Control Strategies on an Open Mobile Robot Platform PRIM
L. Pacheco, R. Arbusé, Ningsu Luo, (University of Girona, Spain)

S4-sI-4

PRIM an Open Mobile Robot Platform. Motivation, Present and Future Trends
L. Pacheco, J. Batlle, X. Cufí, R. Arbusé, (University of Girona, Spain)

S4-sI-5

A Study on Workspace Topologies of 3R Industrial-Type Manipulators
1E. Ottaviano, 2M. Husty, 1M. Ceccarelli, (1University of
Cassino, Italy, 2University Innsbruck, Austria)

S4-sI-6

Mathematical Model and Conventional Control for a Shape Memory Alloy Tendon Actuated Tentacle Robot
N.G. Bizdoaca, A. Petrisor, D. Patrascu,C. Pana, C. Vasile, (University of Craiova, Romania)

 

Fri, May 26
12:00 - 13:30

Room 359

Session S5 - sI
Image and signal processing

Chairs
Sergiu Nedevschi, Franck Luthon, Ovidiu Dancea

 S5-sI-1

Macroscopic Quality Measurement of Plasma Treated Polystyrene through Computer Vision
F. Luthon, F. Clement, (
University of Pau and Adour River, France)

 S5-sI-2

A New SVM-Based Architecture for Object Recognition in Color Underwater Images with Classification Refinement by Shape Descriptors
1M. Gordan, 2O. Dancea, 2I. Stoian, 3A. Georgakis, 4O. Tsatos, (1Technical University of Cluj-Napoca, 2IPA S.A. R&D Institute, Cluj Subsidiary, Romania, 3Umea University, Sweden, 4ALBIODATA S.A Information Systems – Consulting, Greece )

 S5-sI-3

Real-Time 3D Environment Reconstruction Using High Precision Trinocular Stereovision
S. Nedevschi, S. Bota, T. Marita, F. Oniga, C. Pocol, (Technical University of Cluj-Napoca, Romania)

 S5-sI-4

A board Implementation for Fast APA Acoustic Echo Canceller using ADSP-21065L DSP
G. Di Natale, A. Serra, C. Turcotti, (Politecnico di Torino, Italy)

 S5-sI-5

Improved Pattern Matching to Find DNA Patterns
L. Dudás, (
University of Miskolc, Hungary)

 S5-sI-6

Computational Complexity Reduction of the Support Vector Machine Classifiers for Image Analysis Tasks Through the Use of the Discrete Cosine Transform
1M. Gordan, 2A. Georgakis, 3O. Tsatos, 1G. Oltean, 1L. Miclea, (1Technical University of Cluj-Napoca, Romania, 2Umea University, Sweden, 3ALBIODATA S.A Information Systems – Consulting, Greece)

S5-sI-7

Emphasis of Geomorphometric Features using Wavelet Domain Markov Trees
C. Rus, C. Rusu, (Technical
University of Cluj-Napoca, Romania)

 

Fri, May 26
12:00 - 13:30

Room 46

Session S6 - sI
Industrial Applications

Chairs
Eugen Stancel, Dumitru Stanciu, Istvan Hoka

S6-sI-1

Equipment to Estimate the Quantity of Excavated Material with Energetic Methods, in Open Pits
1G. Vladut, 1A. Mogosan, 1V. Kese, 2D. I. Bucur, (1SC IPA SA CIFATT
Craiova, 2SNLO, EMC Husnicioara, Romania)

S6-sI-2

Voice Coil Actuator for Hydraulic Servo Valves with High Transient Performances
L. Nascutiu, (Technical
University of Cluj-Napoca, Romania)

S6-sI-3

Optimal Control for Bridge Series Resonant Inverter
R. Campeanu, C. Suciu, R. Demeter, (Transilvania
University of Brasov, Romania)

S6-sI-4

A New CCII-Based Universal Biquad
L.Nedelea, M.Neag, M.Topa, L.Festila, (Technical
University of Cluj-Napoca, Romania)

S6-sI-5 

Rotor Fault Detection in Induction Machines: Methods and Techniques - State-of-the-Art
1P. Bikfalvi, 2M. Imecs, (1University of
Miskolc, Hungary, 2Technical University of Cluj, Romania)

S6-sI-6

Determining the Optimal Operating Regime of the Traction Motors for Constant Power Operation of the Vehicle
G. Popa, (
Polytechnic University of Bucharest, Romania)

 

Fri, May 26
12:00 - 13:30

Room E15

Session S7 - sI
Software Applications

Chairs
Tiberiu Letia, Honoriu Valean, Adrian Gut

S7-sI-1

Algorithm for Computer Aided Design Curve Shape Form Generation of Knitted Patterns
E. Zaharieva-Stoyanova, (Technical
University of Gabrovo, Bulgaria)

S7-sI-2

On Mean Throughput of One-Processor Systems
A.G. Chefranov, A. A. Chefranov, (Eastern Mediterranean University, Russia)

S7-sI-3

Visualization – A Key Concept for Multidimensional Performance Modeling in Software Engineering Management
V. Stroian, P. Bourque, A. Abran, (École de Technologie Supérieure, Canada)

S7-sI-4

Multiagent technology for an Urban Road Traffic Advisor
C. Avram, A. Astilean, T. Letia, (Technical
University of Cluj-Napoca, Romania)

S7-sI-5

Real-Time Approaches of Urban Vehicle Traffic Control
T. S. Letia, (Technical
University of Cluj-Napoca, Romania)

S7-sI-6

Revealing the Structure and the Cause-Effect Relations in Partly Observable Systems
T. Bákai, (
University of Miskolc, Hungary)

S7-sI-7

Database Globalization in Enterprise Applications
A. Gut, L. Miclea, Sz. Enyedi, M. Abrudean, I. Hoka, (Technical University of Cluj-Napoca, Romania)

 

Fri, May 26
12:00 - 13:30

Room E17

Session S8 - sI
Quality of life (Medical Informatics, Telemedicine)

Chairs
T. Drugan, Dorina Capatana, Teodora Sanislav

S8-sI-1

Some Consideration about the Model of Human Information Processing
M. Truta, (
National Intelligence Academy, Bucharest, Romania)

S8-sI-2

The Vibrations Transmissibility from the Machine-Tools to the Human Operator Elbow, on the “X” Measurement Direction
M. Arghir, A.F. Cristea, (Technical
University of Cluj-Napoca, Romania)

S8-sI-3

Using the Cooperative Robots Concept in Emergency and Catastrophes Medicine
1I. Stoian, 2A. Golea, 2R. Badea, 1A. Moldovan, 1O. Dancea, 1C. Posteuca, (1IPA R&D Institute for Automation, Cluj Subsidiary, 2“Iuliu Hatieganu” Medicine and Pharmacy
University of Cluj-Napoca, Romania)

S8-sI-4

Aspects Concerning the Simulation of a Mechanical Monoleaflet Heart Valve Closure
C. Giurgea, D. Rafiroiu, L. Nascutiu, (Technical
University of Cluj Napoca, Romania)

S8-sI-5

Analogical Model of Periodontal Stress Distribution during Orthodontic Tipping of Single Rooted Teeth
1H. A. Colosi, 2M. N. Roman, 1A. Achimas- Cadariu, (1University of Medicine and Pharmacy,
Cluj-Napoca, 2Technical University Cluj-Napoca, Romania)

S8-sI-6

Numerical Simulation of Periodontal Stress Distribution during Orthodontic Tipping of Single Rooted Teeth
1H. A. Colosi, 2M. N. Roman, 1A. Achimas Cadariu, (1University of Medicine and Pharmacy,
Cluj-Napoca, 2Technical University Cluj-Napoca, Romania)

S8-sI-7

Analysis of the Dynamic Behaviour of Malignant Tumours using Mathematical Models and Ultrasound Parameters – A Survey
1T. Pop, 1O. Mosteanu, 2P. Raica, 1R. Badea, 2L. Miclea, (1University of Medicine and Pharmacy
Cluj-Napoca, 2Technical University of Cluj-Napoca, Romania)

Fri, May 26
14:00 - 15:45

Lunch

 

Friday, May 26
IPA CIFATT Cluj Subsidiary, 15 Zorilor Street

Fri, May 26
16:00 - 16:30

IPA Showroom

Multimedia session S2 - m1, S4 - m1
Testing and Quality, Robotics and CIM

Chairs
Elena Zaharieva-Stoyanova, Doina Pisla, Cristian Posteuca

S2-m1-1

Superior-Order Curvature-Corrected Voltage References using Double Differential Structures
C. Popa, (Faculty of Electronics, Telecommunications and Information Technology
Bucharest, Romania)

S2-m1-2

Information System for the Global Performance Evaluation of Organizations, Based on the Balanced Scorecard Method
M. Mircea,
I. Stoian, R. Meza, O. Dancea, (IPA -R&D Institute for Automation - Cluj Subsidiary, Romania)

S2-m1-3

Identification of Software Specifications through Quality Function Deployment
1R. C. Vlad, 2L. Benyoucef, 1S. Vlad, (1Technical
University of Cluj-Napoca, Romania, 2INRIA Lorraine, France)

S2-m1-4

Methods for Accuracy Tests in Industrial Vision and Video Surveillance Applications
R. Arsinte, Z. Baruch, (
Technical University Cluj-Napoca, Romania)

S2-m1-5

Automatic Usability Evaluation using AOP
A. M. Tarta, G. S. Moldovan, (
Babes-Bolyai University, Romania)

S2-m1-6

Distributed Database Environment Testing
G. Dragomir ,
I. Ignat, (Technical University of Cluj-Napoca, Romania)

S4-m1-7

Interactive Modelling of the Robotized Systems
A. Pisla , D.A. Vidrean, D.L. Pisla, (Technical
University of Cluj-Napoca, Romania)

S4-m1-8

An OpenGL Application for Industrial Robots Simulation
C. Marcu, Gh. Lazea, R. Robotin, (Technical
University of Cluj-Napoca, Romania)

S4-m1-9

Towards Open Architectures for Mobile Robots: ZeeRO
1,2R. Bogdan Rusu , 1R. Robotin, 1Gh. Lazea, 1C. Marcu, (1Technical
University of Cluj-Napoca, Romania, 2Technische Universität München, Germany)

S4-m1-10

Virtual Models of Special Class of PARTNER Robots
1C. Brisan, 2M. Hiller, 1I.Birou, (1Technical
University of Cluj-Napoca, Romania, 2Duisburg-Essen University, Germany)

S4-m1-11

Aspects of Calibration and Control of PARTNER Robots
1C. Brisan, 2M. Hiller, (1 Technical University of
Cluj-Napoca, Romania, 2 Duisburg-Essen University, Germany)

 

Fri, May 26
16:30 - 17:00

IPA Showroom

Multimedia session S3 - m2
Measurement and Quality of environment

Chairs
Grigore Vlad, Rodica Meza, Marius Roman

S3-m2-1

The Rotor Equilibration Tester - AC Drive
V. Buta, C. Iordache, St. Gavat, C. Mada, D. Stanciu, (IPA SA, Bucharest, Romania)

S3-m2-2

Process Electronic Refractar Meter in a Compact Structure
C. Cristescu, (IPA SA,
Bucharest, Romania)

S3-m2-3

About the Physical Methods Applied by Underground Water Treatment in Food Industry
1D. Vaju, 1G. Vlad, 2C. Festila, (1S.C. ICPE Bistrita S.A., 2Technical
University of Cluj-Napoca, Romania)

S3-m2-4

New Design of pH / Blood Gas Analyzer
1N. Roman, 1R. Ciupa, 2E. Gligor, 1M. Abrudean, 1F. Roman, (
1Technical University of Cluj-Napoca, 2University of Medicine and Pharmacy, Cluj-Napoca, Romania)

S3-m2-5

Decision Assistance System for Environment Quality Analyse
1V. Matei, 1C. Cojocaru, 2C. Croitoru, 2F. Pop, 3M. Patrascu, 3A. Pop, 3E. Watzlawek, 3D.Cheresdi, (1IPA CIFATT
Craiova, 2INC-DTCI ICIS Ramnicu Valcea, 
3Sucursala RAAN - ROMAG PROD Drobeta Turnu Severin, Roman)

S3-m2-6

Portable Multigas Toximetre for Areas with Danger of Explosion
1E. Cordos, 1L. Ferenczi, 1S. Cadar, 1S. Costiug, 1G. Pitl, 2M. Chintoanu, (1Research Institute for Analytical Instrumentation,
Cluj-Napoca, 2Tehnical University of Cluj-Napoca, Romania)

S3-m2-7

Data Acquisition for Pressure Monitoring and Control in Distribuited Systems
Agoston Katalin, (“Petru Maior” University, Tg.
Mures, Romania)

S3-m2-8

Methods for Singing Voice Identification using Energy Coefficients as Features
A. Mesaros, S. Moldovan, (Technical
University of Cluj-Napoca, Romania)

S3-m2-9 

SIIPAL A Public Administration e-Learning System. Student Assessment
Al. Botu, A. Badoiu,
S. Petrescu, V. Vlad, (IPA SA, Bucharest, Romania)

S3-m2-10

An Intelligent System for Rivers Water Quality Assessment, based on Pollutants Propagation Modeling and Simulation
1R Meza, 1I. Stoian, 1M.Mircea, 1S. Ignat, 2Z. Moldovan, 3M.V.Cristea, 3A.Imre, (1IPA -R&D Institute for Automation - Cluj Subsidiary, 2INCDTIM -National Institute for R&D of Isotopic and Molecular Technologies, 3“Babes Bolyai” University, Romania)

S3-m2-11

Software Application for Monitoring a Small Air Conditioning Unit
M. Balan, M. Damian, (Technical
University of Cluj Napoca, Romania)

 

Fri, May 26
17:00 - 17:30

IPA Showroom

Multimedia session S5 - m3
Image and signal processing

Chairs
Mihaela Gordan, Kovacs Istvan, Iulian Filip

S5-m3-1

Voice Signal Processing For Speech Synthesis
O. Buza, G. Toderean, A. Nica, Al. Caruntu, (Technical University of Cluj, Romania)

S5-m3-2

Simple Image Acquisition System Optoelectronic Analysis
F. Toadere, (Technical
University of Cluj, Romania)

S5-m3-3

Analysis and Synthesis of Vowels Using Matlab
A. Nica, Al. Caruntu, G. Toderean, O. Buza, (Technical University of Cluj, Romania)

S5-m3-3’

Improving Clustering Algorithms for Image Segmentation using Contour and Region Information
O. Arnau, X. Munoz, J. Batlle, L. Pacheco, J. Freixenet, (
University of Girona, Spain)

S5-m3-4

Three-Dimensional Reconstruction of Reliefs with Irregular Forms Starting from Serial Sections
1S.B. Petrescu, 1T.C. Metea, 2C.F. Tudose, 3G. Gheorghiu, (1Computers Science Department,
Politehnica University Bucharest, 2ITC Networks, 3IPA S.A., Bucharest, Romania)

S5-m3-5

Object Recognition Method using a Network Oriented Skeleton Computation
R. Sora, (SC IPA SA,
Bucharest, Romania)

S5-m3-6

The Stitching of Images
V. Prejmerean, (
Babes-Bolyai University of Cluj-Napoca, Romania)

S5-m3-7

Integrated Medical Image Processing Facilities using a Dedicated Application
M.-F. Vaida,
I. Stamate, (Technical University of Cluj-Napoca, Romania)

S5-m3-8 

MPEG-7-like Description Scheme for Osteoporosis Diagnosis Support
1C. Vertan, 1L. Sirbu, 2I. Stefan, (
1Politehnica University of Bucharest, 2Baia Mare County Hospital, Baia Mare, Romania)

 

Fri, May 26
17:30 - 18:00

IPA Showroom

Multimedia session S6 - m4
Industrial Applications

Chairs
Alexandru Botu, Rodica Meza, Sorin Ignat

S6-m4-1

Remote Monitor and Control Application for Thermal Processes using TCP/IP
1S. E. Oltean, 2M. Abrudean, 1M. Dulau, (1“Petru Maior”
University of Targu Mures, 2Technical University of Cluj Napoca, Romania)

S6-m4-2

Distance Process Monitoring using Labview Environment
M.S. Vlad, V. Sgarciu, (University “POLITEHNICA” of
Bucharest, Romania)

S6-m4-3

Development of Hysteresis Modulation Methods for PWM AC – to – DC Converters Based on Dead – Beat Control
G. Rata, R. Marschalko, (
Technical University Cluj, Romania)

S6-m4-4

Intelligent System for Underwater Inspection Based On Digital Camera
E. Stancel, I. Stoian, B. Gyurka, C. Posteuca, A. Moldovan, (IPA – R&D Institute for Automation, Cluj Subsidiary, Romania)

S6-m4-5

Automatic Data Acquisition Station for Hydropower Dams with Earthquake Trigger Action
1I. Kovacs, 1A. Calarasu, 2M. Ordean, (1IPA R&D Institute for Automation, Cluj Subsidiary, 
2SC Hidroelectrica SA, Cluj Napoca Subsidiary, Romania)

S6-m4-6

Solar Architecture – First Steps In Romania
1S. Fara, 1D. Finta, 1M. Iancu, 2L. Fara, 3M. Paulescu, (1IPA SA,
Bucharest, 2Polytechnic University Bucharest, 3West University of Timisoara, Romania)

S6-m4-7

SCADA Systems – Support for the Maintenance Management of Hydro Power Plants
1M. Ordean, 1D. Chiorean, 1I. Rogoz, 1C. Lehene, 2I. Stoian, 2E. Stancel, (1S.C. Hidroelectrica SA, Cluj Subsidiary, 2IPA- R&D Institute for Automation, Cluj Subsidiary, Romania)

S6-m4-8

PWM Three-Level Inverter Control
D. Stanciu, C.N. Popescu, (University Politehnica of
Bucharest, Romania)

S6-m4-9

Shunt Circuit-Breaker - Automation System,Solution for Reducing of the Number of Interruptions at the Consumers
F. Vatra, M. Stein, (Society of Power Engineers in
Romania - SIER, Bucharest, Romania)

 S6-m4-10

The Synthesis of Electroparametric Circuits
1Adriana Micu, 2D. Micu, 2D.D. Micu, 2L. Chira, (
1Energetics College, Cluj-Napoca, 2Technical University, Cluj-Napoca, Romania)

S6-m4-11 

Ring Oscillator Based on R-NMOS Logic with Back-Gate Control
1,4R. Ionita, 2M.Sanduleanu, 1,3A.Vladimirescu, 4D.Steriu, (1Institut Superieur d’Electronique de Paris, France, 2Philips Research Eindhoven, The Netherlands, 3University of California at Berkeley and BWRC, Berkeley, USA, 4University Politehnica of Bucharest, Romania)

 

Fri, May 26
18:00 - 18:30

IPA Showroom

Multimedia session S7 - m5
Software Applications

Chairs
Adriana Tarta, Clement Festila, Mihai Hulea

S7-m5-1

On the Implementation of a Speech Recognizer for Romanian Language Based on Hidden Markov Models
Al. Caruntu, (Technical
University of Cluj-Napoca, Romania)

S7-m5-2

Distributed Tool for Student Evaluation in E-learning
1G. Dragomir, 1A. Pop, 2E. Sidea, (
1Technical University of Cluj-Napoca, 2Edmond Nicolau” High School of Cluj-Napoca, Romania)

S7-m5-3

Web-Based Security Constrained Unit Commitment System
1M. Risteiu, 2J. Sturgul, 1I. Ileana (1“1 Decembrie 1918”
University of Alba Iulia, Romania, 2University of Idaho, Moscow, USA)

S7-m5-4 

Optimizing the Power Consumption of Economic Agents with the help of an Intelligent Analysis and Decision System
I.
Miciu, (SC IPA SA, Bucharest, Romania

S7-m5-5

Programmable GPS Receiver for Automatic Vehicle Location
E. Pop, Al. Botu, (R&D Institute for Automation IPA SA,
Bucharest, Romania)

S7-m5-6

Products of HYPOS - DILETR project: distance learning courses in design and operation of Hybrid Power Systems
1S. Fara, 1D. Finta, 1M. Iancu, 2L. Fara, 3C. Malamatenios, (1IPA SA,
Bucharest, 2Polytechnic University Bucharest, Romania, 3CRES, Attiki, Greece)

S7-m5-7

Portal for Technology Information (TechnoInfo)
Al. Botu, O. Ivan, A. Badoiu, (IPA
Bucharest, Romania)

S7-m5-8

Automation and Remote Monitoring Hierarhical System for a Hydro-Energy Group
D. Emanoil, M. Stanciu, (IPA
Bucharest, Romania)

S7-m5-9

Informatic System for Oil Stok Evidence in Tank Parks
Al. Botu, C. Ogescu, V. Raileanu, (IPA Bucharest, Romania)

S7-m5-10

A SCADA System for Water Potential Management of a Hydropower Plants Cascade
1A. M. Tarta, 2G. Ungureanu, 2D. Capatina, 2F. Covaciu, (
1Babes-Bolyai University, 2IPA R&D Institute for Automation, Cluj Subsidiary, Romania)

S7-m5-11

Information Security, Part of the IT-Integration Process
M. Mocanu, D. Mihaila, (University POLITEHNICA from
Bucharest, Romania)

 

Fri, May 26
18:30 - 19:00

IPA Showroom

Multimedia session S8 - m6
Quality of life (Medical Informatics, Telemedicine)

Chairs
Monica Popa, Dorina Capatana, Cristina Schiau

S8-m6-1

The Measurement of Body Composition by Bioelectrical Impedance
M. Popa, D. Sîrbu, D. Curseu, A. Ionutas, („Iuliu Hatieganu ”
University of Medicine and Pharmacy, Cluj – Napoca, Romania)

S8-m6-2

Spectral Techniques In Finding DNA Approximate Tandem Repeats
P. G. Pop, (
Technical University of Cluj-Napoca, Romania)

S8-m6-3

An Algorithm for Extraction of Iris Information
1A. Discant, 2S. Demea, (
1Technical University of Cluj-Napoca, 2Huedin Hospital, Department of Ophthalmology, Romania)

S8-m6-4

Distributed Approximating Functional Wavelet based neural network in ECG signal processing
Z. Germán-Salló, (“Petru Maior” University of Tg-Mures,
Romania)

S8-m6-5

Necessary Preliminaries for the Modeling and Numerical Simulation of the Effects of Anterior Teeth Implantation on Complete Denture Stability
M. Constantiniuc, H. Colosi, L. Lascu, (Medicine and Pharmacy University “Iuliu Hatieganu” of Cluj-Napoca, Romania)

S8-m6-6

Parameters Monitoring Solutions for the Quality Control of Water Used in Healthcare Units
1A. Manciu, 2M. Popa, 3D. Mitrea, 1D. Capatina, (1IPA R&D Institute for Automation, Cluj Subsidiary, 2”Iuliu Hatieganu” Medicine and Pharmacy University of Cluj-Napoca, 3Technical University of Cluj-Napoca, Romania)

S8-m6-7

Information System for Multimodal Parameter Analysis Applied in Early Detection of Prostate Cancer
1O. Dancea, 1M. Mircea, 2R. Badea, 3A. Stoian, 2T. Vasile, 1A. Manciu, (1IPA SA R&D Institute, Cluj Subsidiary, 2“Iuliu Hatieganu”Medicine and Pharmacy University of Cluj-Napoca, Romania, 3L’Hospital Clinic Thonon, France)

S8-m6-8

Information System for Tumor Angiogenesis Phenomena Imaging Monitor
1A. Stoian, 2M. Mircea, 2O. Dancea, 3R. Badea, 4C. Floares, (1L’Hospital Clinic Thonon, France, 2IPA S.A. R&D Institute Cluj Subsidiary, 3“Iuliu Hatieganu” Medicine and Pharmacy University of Cluj-Napoca, 4“Ion Chiricuta” Oncological Institute, Romania)

S8-m6-9

Telescreening System for Early Detection of Hepatocellular Carcinoma
1H.Stefanescu, 1R. Badea, 1M. Lupsor, 2I. Stoian, 2C. Schiau, 2O. Dancea, (1“Iuliu-Hatieganu” University of Medicine and Pharmacy,
Cluj-Napoca, 2IPA – R&D Institute for Automation, Cluj Subsidiary, Romania)

S8-m6-10

Ultrasonography contribution to hepatic steatosis quantification. Possibilities of improving this method through computerized analysis of ultrasonic image
1M. Lupsor, 1R. Badea, 2S. Nedevschi, 2D. Mitrea, 1M. Florea, (1University of Medicine and Pharmacy,
Cluj-Napoca, 2Technical University, Cluj-Napoca)

 

Fri, May 26
16:00 - 17:00

IPA Showroom

Poster session P1

Chairs
Florin Covaciu, Silviu Folea

P1-1

LQR Design of Automatic Voltage Regulator for Multimachine Power Systems
B. Cosmin, B. Paul, M. Alexa, ("Ovidius” University
Constanta, Romania)

P1-2

Dynamic Modeling of Pantograph – Catenary System for Energy Loss Control
1N. Rusu, 2J. Averseng, 1C. Miklos, 1C. Alic, 1S. Anghel, (1Faculty of Engineering Hunedoara, Romania, 2Blaise Pascal University Clermont-Ferrand, France)

P1-3 

Stability Study on Speed Estimator MRAS Used Within Sensor less Vector Driving Systems With Induction Motors
C. Mandrescu, O. Stoicuta, (University of Petrosani, Romania)

P1-4

Real - Time Simulation of the Extended Luenberger Estimator Using the eZdsp 2812 Development Kit
O. Stoicuta, C. Mandrescu, (University of Petrosani, Romania)

P1-5

Prediction by numerical simulation and combustion control in a burner and its combustion chamber
V. Hodor , F. Bode, P. Unguresan, (Technical University of Cluj-Napoca, Romania)

P1-6

Using Acoustic Emission in Monitoring the Hydraulic Devices
D. Opruta, L. Vaida, A. Plesa, C. Vaida,  (Technical University of Cluj-Napoca, Romania)

P1-7 

Contribution Concerning CIM Modeling and Simulation
A. Egri, V.-C. Sirb, B. Sochirca, (University of Petrosani, Romania)

P1-8

Depth Control for an Autonomous Underwater Vehicle
P. Burlacu, C. Bucur, M. Alexa, (”Mircea cel Batran”
Naval Academy, Constantza, Romania)

P1-9

Optimal Design for a Mini-Manipulator Using Advanced Modeling Software
C. Vaida, (Technical
University of Cluj-Napoca, Romania)

P1-10

Computer Aided Design of a Gantry Robotic System used for Spray Painting
B. Prodan, (
Technical University of Cluj-Napoca, Romania)

P1-11

Parallel Structure for the Powder Milling Process
M. Arghir, (Technical
University of Cluj-Napoca, Romania)

P1-12 

Embedded Controlled System for Material Dynamic Processing in Microwaves Power Field
E.Surducan, V.Surducan, (National Institute of Research and Development for 
Isotopic and Molecular Technologies,
Cluj Napoca, Romania)

 

Fri, May 26
17:00 - 18:00

IPA Showroom

Poster session P2

Chairs
Paulina Mitrea, Gicu Ungureanu

P2-1

SmartModels. A Model Oriented Approach Validated by a Prototype Based on Eclipse Platform
E. Tundrea, D. Pescaru, C. B. Chirila, (“Politehnica” University of Timisoara, Romania)

P2-2

Dependent Fail Processes And Scalefree Networks
V. Dub, (“
Petru Maior University” of Tg-Mures, Romania)

P2-3

Data Acquisition and Processing by I2C Protocol and Virtual Instrumentation
N.Patrascoiu, A. M.Tomus, (
University of Petrosani, Romania)

P2-4

Matrix Shape for Rotations Operators in Graphics Media
E. Olteanu, R. Joldes, E. Ceuca, ("1 Decembrie 1918" University of Alba Iulia, Romania)

P2-5

Proposal for a Cheap Optoelectronic Presentation System
A. Incze ,
I. Ileana, ("1 Decembrie 1918" University of Alba Iulia, Romania)

P2-6 

A Computerized Method of Iris Image Analysis for Evaluating Prognostic Factor in Some Medical Pathological Groups
1R. Holonec, 2S. Demea, (
1Technical University of Cluj-Napoca, 2Huedin Hospital, Department of Ophthalmology, Romania) 

P2-7

The Exposure to Asbestos and Man - Made Mineral Fibres in Buildings - a Challenge for Environment Protection
M. Popa, D. Curseu, D. Sarbu, (University of Medicine and Pharmacy
Cluj-Napoca, Romania)

P2-8

Air Ionization as Method of Reduction of the Airborne Microorganisms in a Dental Clinic
1D. Curseu, 1D. Sarbu, 1M. Popa, 2S. Jawabra, (1University of Medicine and Pharmacy
Cluj-Napoca, 2Private Dental Clinic, Cluj-Napoca Romania)

P2-9

Quality Raised Life Integrated System by Remote Monitoring and Real Time Signal Processing
1V. Olaru, 2C. Cepisca, 3C. Banica, 3G. Seritan, 4A. Boev, 5M. Dorobantu, 5R. Vatasescu, 5M. Albu, (1IPA CIFATT Bucharest, 2CMIM-UP Bucharest, 3WING Computer Group Bucharest, 4Fundeni Hospital Bucharest, 5Bucharest Emergency Hospital, Romania)

P2-10

Introductory Aspects in the Numerical Modeling and Simulation of Complete Denture Shifting Caused by the Achievement of Dental Arch in Posterior Area
M.Constantiniuc, H. Colosi, L. Lascu, (Medicine and
Pharmacy University “Iuliu Hatieganu” of Cluj-Napoca, Romania)

 

Fri, May 26
18:00 - 19:00

IPA Showroom

Poster session P3

Chairs
Daniel Moga, Gyurka Bela

P3-1

Computer-based Development System for Stepping Motors Open-loop Control
Szász Csaba, (Technical
University of Cluj-Napoca, Romania)

P3-2

Essential Aspects in the Soft Design of a New Type of Absolute Encoder System (NAES) for Long Distance and Fine Accuracy
A M. Argeseanu, (
Politehnica University Timisoara, Romania)

P3-3

Remote Control of Micro Hydro Electric-Power Station
1A. Mogosan, 2C. Rusta, 3I. Purcaru, (1IPA CIFATT
Craiova, 2SC Hidroelectrica SA Tg-Jiu Subsidiary, 3SC VIG Impex SRL Craiova, Romania)

P3-4

Automated Maintenance Management System for Small Power Hydroelectric Plants
B.Z. Gyurka,
S. Balogh, E. Stancel, (SC IPA SA Subsidiary Cluj, Romania)

P3-5

Method for the Self-Regulating of the Alternative Current Traction Motor Parameters at Locomotives
R. G. Matusa, (CONFERO
Craiova, Romania)

P3-6

Stability of the Traction Engine in Conditions of Regenerative Braking at High Speed Locomotives and Trains
1D. Mihailescu, 2C.E.Ivana, 3O. Tortolea, 4M. Popescu, (1Foundation for Railroad Science and Technique –PROFER, 2The
Institute of Railways Studies and Designs, 3Centre for Durable Environment Policies, 4SC Tranet servicii SRL, Romania)

P3-7

Optimum Adjustment Method of the Synchronous Excitation Engine for the Fulfillment of the Stability in Railroad Traction
1M. Radulescu, 1R. Prejbeanu, 2D. Mihailescu, (1SC INDA -
Craiova, 2Ecological University of Bucharest, Romania)

P3-8

The Analysis of the Response Time at the Start of the Vehicles Equipped with Asynchronous Tri-Phase Motors
G. Popa, (
Polytechnic University of Bucharest, Romania)

P3-9

Four Quadrant Chopper Drive with Specialized Integrated Circuits
Al.Morar, (“Petru Maior” University of Targu-Mures,
Romania)

P3-10

PROMIST a supporting tool for increasing the Romanian participation to EC - FP7
1M. Guth, 2D. Cosnita, 3V. Olar, 3S. Baban, (1Zenit GmbH
Germany, 2IBD/GTZ Romania, 3IPA SA Romania)

P3-11

Distributed consoles in SCADA systems
A. Balaj, T. Sanislav, D. Capatana, O. Ghiran,
E. Stancel, (IPA – R&D Institute for Automation, Cluj Subsidiary, Romania)

 

Fri, May 26
17:00 - 18:00

IPA Council room

Round table, FP7 R& D funding opportunities

Fri, May 26
20:00 - 22:00

Cocktail

Saturday, May 27
Technical University of Cluj-Napoca, 26 - 28 Baritiu Street

Sat, May 27
9:00 - 11:00

Room 40

Session S1 - sII-1
Advanced control, modeling and simulation

Chairs
Matei Vinatoru, Tiberiu Colosi, Ioana Vatajelu

S1-sII-1-1

The Modelling of the Power Factor in Steady State Non Sinusoidal Regime with Mathcad Techniques
1H. Andrei, 2C. Cepisca, 2F. Spinei, (1Valahia
University of Targoviste, 2Politehnica University of Bucharest, Romania)

S1-sII-1-2

MRAC and FMRLC for a Plant with Time Varying Parameters
1S. E. Oltean, 2M. Abrudean, 1A. Gligor, (1“Petru Maior”
University of Targu Mures, 2Technical University of Cluj Napoca, Romania)

S1-sII-1-3

Modeling and Numerical Simulation of PDE Using the (Mdpx) Matrix, Associated to Taylor Series
T. Colosi, E. Dulf, M. Abrudean, (
Technical University of Cluj-Napoca, Romania)

S1-sII-1-4

Systemic Approach for Numerical Modeling and Simulation of the Impulse Response for Rapid Reaction Cu2+ – S2O32-
1M.L. Unguresan, 1T. Colosi, 2E. Surducan, 2V. Surducan, (1Technical
University of Cluj-Napoca, 2INCDTIM Cluj-Napoca, Romania)

S1-sII-1-5

Theoretical Preparatories Regarding Modelling and Numerical Simulation of Some Distributed Parameters Processes
L. Buzdugan, T. Colosi, (Technical
University of Cluj-Napoca, Romania )

S1-sII-1-6

Theoretical Preliminaries Regarding the Modeling and Identification of an Electric Oven with Silicon Carbide Heating Elements
E. I. Vatajelu, T. I. Buzdugan, C. Festila, I. Nascu, (Technical University of Cluj-Napoca, Romania ) 

S1-sII-1-7

Some Applications for Nonlinear Processes of a Predictive Control Algorithm
S. Stan, R. Balan, C. Lapusan, (Technical University of Cluj-Napoca, Romania )

 

Sat, May 27
9:00 - 11:00

Room 41

Session S1 - sII-2
Advanced control, modeling and simulation

Chairs
Richard Marschalko, Ioan Nascu, Tudor Buzdugan

S1-sII-2-1

Simulink Implementation of Fuzzy Functional
G. Oltean,
E. Sipos, (Technical University of Cluj-Napoca, Romania)

S1-sII-2-2

An Algorithm for Fuzzy Relation Identification
A. Bara, (
University of Oradea, Romania)

S1-sII-2-3

Study of NOx Reduction in Counter-Current Cromatographic Reactor
C.C. Botar-Jid, P.S. Agachi, (“Babes-Bolyai” University
Cluj-Napoca, Romania)

S1-sII-2-4

Stability of the Fast Voltage Control Loop in DC-DC Converters
P. Dobra, L. Nagy-Kulcsar, M. Trusca, D. Moga, R. Balan, (Technical University of Cluj-Napoca, Romania)

S1-sII-2-5

The Comparative Study of the Stability of the Vector Control Systems that Contain in the Loop Luenberger and Kalman Type Estimators
1O. Stoicuta, 2H. Campian, 2T. Pana, (1University of Petrosani, 2Tehnical
University of Cluj Napoca, Romania)

S1-sII-2-6

Controlling a chaotic behavior of a Current Mode Controlled Boost Converter Using OGY Method
F. Dragan, (University “Politehnica” from
Timisoara, Romania)

S1-sII-2-7

Development and Evaluation of a PID Auto-Tuning Controller
1I. Nascu, 2R. De Keyser, 1S. Folea, 1T. Buzdugan, (1Technical
University of Cluj Napoca
Romania
, 2Ghent University, Belgium)

 

Sat, May 27
9:00 - 11:00

Room 356

Session S1 - sII-3
Advanced control, modeling and simulation

Chairs
Maria Imecs, Paula Raica, Aurelian Ignat

S1-sII-3-1

About the Stability of the Extremum Control Systems for Induction Traction Motors
1R. Festila, 2V. Tulbure, 1C. Festila, (
1Technical University of Cluj-Napoca, Cluj-Napoca, 2Administration of the Romanian Railways, Romania)

S1-sII-3-2

Developing Simulation Models of Open Distributed Control System - Design Concepts Based on Foundation Fieldbus
L. Nagy-Kulcsar, P. Dobra, D. Moga, M. Dumitrean,
N. Stroia, (Technical University of Cluj-Napoca, Romania)

S1-sII-3-3

Comparative Performance Analysis of Artificial Reverberation Algorithms
N. Toma, M. D. Topa, V. Popescu, E. Szopos, (Technical University of Cluj-Napoca, Romania)

S1-sII-3-4

Supported Inverted Pendulum, another Kind of Inverted Pendulum
A. Joldis, (
Technical University of Cluj-Napoca, Romania)

S1-sII-3-5

Feedback Linearization of the Double- and Single-Rod Hydraulic Servo Actuators
L. Nascutiu, (Technical
University of Cluj-Napoca, Romania)

S1-sII-3-6

Model Predictive Control of (15N) Isotope Separation Column
E. H. Dulf, Cl. Festila, (
Technical University of Cluj-Napoca, Romania)

S1-sII-3-7

Preliminaries Regarding General Modeling of the Cryogenic Distillation with Application to (13C) Isotope Separation
1M.Gligan, 2E.Dulf, 2M.-L.Unguresan, 2Cl.Festila, (1National Institute for R&D for Isotopic and Molecular Technologies Cluj – Napoca,
2Technical University of Cluj-Napoca, Romania)

S1-sII-3-8

Operational Models of the Cryogenic Distillation Column for (13C) isotope
1E.Dulf, 1M.-L. Unguresan, 2M.Gligan, 1Cl.Festila, (1 Technical University of
Cluj-Napoca, Romania, 2National Institute for R&D for Isotopic and Molecular Technologies Cluj – Napoca)

 

Sat, May 27
9:00 - 11:00

Room 359

Session S3 - sII
Measurement and Quality of environment

Chairs
Sergiu Caraman, Petru Dobra, Mircea Chintoanu

S3-sII-1

Type Test Procedure for Electronic Ground Power Units
A. Tulbure, (
University of Petrosani, Romania)

S3-sII-2

About Pollution in Electrical Networks. The Fluctuating Power
L.M.Matica, R.I.Matica, A.Pavel, (
University of Oradea, Romania)

S3-sII-3

Programmable Logic Device Used for the Priming of the Blasting Cartridge in Explosive Areas
A. Poanta, D. Dojcsar, (
University of Petrosani, Romania)

S3-sII-4

GPRS Based System for Atmospheric Pollution
S. Constantin, F. Moldoveanu, R. Campeanu, I. Baciu, S.M.Grigorescu, B. Carstea, V. Voinea, (Transilvania University of Brasov, Romania)

S3-sII-5

Wastewater Treatment Process Identification Based on the Calculus of State Variables Sensibilities with respect to the Process Coefficients
S. V. Caraman, M. Barbu, G. Dumitrascu, (”Dunarea de Jos” University of Galati, Romania)

S3-sII-6

Assurance of Quality Control in Analytical Procedures Using Mass Spectrometry
1Z. Moldovan, 1G. Schmutzer, 2A. Alder, (1National
Institute of Research and Development for Isotopic and Molecular Technology, 2Swiss Federal Institute for Environmental Science and Technology , EAWAG, Switzerland)

S3-sII-7

Methane And Carbon Monoxide Gas Detection System Based On Semiconductor Sensor
1E.Cordos, 1L.Ferenczi, 1S.Cadar, 1S.Costiug, 1G.Pitl, 1A.Aciu, 1A.Ghita, 2M.Chintoanu, (1Research Institute for Analytical Instrumentation, Cluj-Napoca, 2Technical University of 
Cluj-Napoca, Romania)

 

Sat, May 27
9:00 - 11:00

Room F

Session S4 - sII
Robotics and CIM

Chairs
Gheorghe Lazea, Cornel Brisan, Sorin Herle

S4-sII-1

 Workspace Optimization of a Two Degree of Freedom Mini Parallel Robot
S. Stan, (Technical
University of Cluj-Napoca, Romania)

S4-sII-2

New Formulations in the Applied Mechanics to Robotics
I.
Negrean, I. Vuscan, (Technical University of Cluj-Napoca, Romania)

S4-sII-3

Workspace Analysis of a Three Degrees of Freedom Parallel Robot
T.-P. Itul, D.L.Pisla, (Technical
University of Cluj-Napoca, Romania)

S4-sII-4

Mobile Robot Tracking Control Experiments along Memorized Planed Trajectories
M. Nitulescu, (
University of Craiova, Romania)

S4-sII-5

Effects Of The Small Delays In Robotic Control Systems
M.Trusca, Gh.Lazea, P.Dobra, (Technical
University of Cluj-Napoca, Romania)

S4-sII-6

Vision Based Algorithm for Path Planning of a Mobile Robot by using Cellular Neural Networks
1I. Gavrilut, 1A. Gacsádi, 1C. Grava 1, 2V. Tiponut, (1University of
Oradea, 2Politehnica University from Timisoara, Romania)

 

Sat, May 27
9:00 - 11:00

Room 46

Session S6 - sII-1
Industrial Applications

Chairs
Lelia Festila, Radu Campeanu, Cristian Posteuca

S6-sII-1-1

Electronic Ballast From Battery With Dimming Control
D. Petreus, C. Farcas, N. Palaghita, Z. Juhos, (Technical University of Cluj-Napoca, Romania)

S6-sII-1-2

D.C. Drive System with the Insulated Gate Bipolar Transistors
Alexandru Morar, (“Petru Maior” University of Targu-Mures,
Romania)

S6-sII-1-3

Modular Log-domain Multipliers for SVM Classifiers
L.Festila, R.Groza, M.Cirlugea, M.Topa, (Technical
University of Cluj-Napoca, Romania)

S6-sII-1-4

An Analog Classifier Based on Radial Basis Functions
L.Festila, L.A.Szolga, M.Cîrlugea, A.Fazakas, (Technical
University of Cluj-Napoca, Romania)

S6-sII-1-5

Considerations on an Intelligent Buildings Management System for an Optimized Energy Consumption
A. Gligor, H. Grif, S. Oltean, (“Petru Maior” University of Targu-Mures,
Romania)

S6-sII-1-6

About the Cryogenic Distillation Control for 13C-isotope Separation
1C. Festila, 2A. Baldea, 2M. Gligan, 1M. Abrudean, (
1Technical University of Cluj-Napoca, 2National Institute for Research and Development of Isotopic and Molecular Technologies, Cluj-Napoca, Romania)

S6-sII-1-7

Automated Adaptive Adjustment of the Distribution Ports for Axial Piston Pumps
1A. D. Potolea, 2L. Vaida, 2C. Vaida, (1S.C. RVA – Cluj Branch SRL, 2Technical
University of Cluj-Napoca, Romania)

 

Sat, May 27
9:00 - 11:00

Room E15

Session S6 - sII-2
Industrial Applications

Chairs
Dumitru Mihailescu, Peter Bikfalvi, Szabolcs Balogh

S6-sII-2-1

Simulation of Automotive Alternator - Solution for Increasing Electrical Power
E. Ceuca, R. Joldes, E. Olteanu, (University “1 DECEMBRIE 1918” Alba Iulia, Romania)

S6-sII-2-2

Voltage-Hertz Control of the Synchronous Machine with Variable Excitation
Cs. Szabó, I. I. Incze, Maria Imecs, (Technical University of Cluj-Napoca, Romania)

S6-sII-2-3

About the Quasi-Direct Feed of the Induction Traction Motors from Diesel-electric Locomotives
M.Huzau, E.Dulf, Cl.Festila, (
Technical University of Cluj-Napoca, Romania)

S6-sII-2-4

Numerical Simulation of the Transient Railway Traction Motor with Frequency Control
V. Tulbure, R. Festila, E. Dulf, T. Colosi, (Technical University of Cluj-Napoca, Romania)

S6-sII-2-5

Computer-based Monitoring System for Rotation Speed and Electric Power Consumed by the CleanSys Equipment
M.Roman, N.Filip, F.Roman, (Technical
University of Cluj-Napoca, Romania) 

S6-sII-2-6

The Self-Regulation of the Traction Synchronous Motor Parameters at a Constant Power Coefficient
D.Mihailescu, St.-G.Duduman , (Ecological
University of Bucharest, Romania)

S6-sII-2-7

Diesel-Engine Intelligent Control in Railway Traction
1D.Bonta, 2V.Tulbure, 1Cl.Festila, (
1Technical University of Cluj-Napoca, 2Romanian Railway Company, Romania)

S6-sII-2-8

The Problem of Speed Measurements in the Slip-Slide Control for Electric Railway Traction
1D.Bonta, 1R.Festila, 2V.Tulbure, (1 Technical University of
Cluj-Napoca, 2 Romanian Railway Company, Romania)

 

Sat, May 27
9:00 - 11:00

Room E17

Session S7 - sII-1
Software Applications

Chairs
Adina Astilean,  Cosmin Marcu

S7-sII-1-1

Clustering with Prototype Entity Selection in Data Mining
E.Kovacs, I.Ignat, (Technical
University of Cluj-Napoca, Romania)

S7-sII-1-2

EtherCAT Protocol Implementation Issues on an Embedded Linux Platform
1S.Potra, 2Gh.Sebestyen, (1LVD-Napomar,
Cluj-Napoca, 2Technical University of Cluj-Napoca, Romania)

S7-sII-1-3

Embedded System for Network Flow Identification
Z. Baruch, A. Peculea, R. Arsinte, M. Suciu, Z. Majo, (
Technical University of Cluj-Napoca, Romania)

S7-sII-1-4

Integration Techniques of the Embedded Distributed Systems Using Programming Environments and Industrial Standard Communication Protocols
D.Capatana, I. Stoian, T. Sanislav, O. Ghiran, E. Stancel, I. Filip, (IPA – R&D Institute for Automation, Cluj Subsidiary, Romania)

S7-sII-1-5

TUGIS - Location Based Services in Web Applications
O. Muresan, B. Gavrea, D. Gorgan, (Technical
University of Cluj-Napoca, Romania)

S7-sII-1-6

Design and Testing in Laboratory Environment of the Embedded Microsystem ECAM
A.Astilean, S.Folea, (Technical
University of Cluj-Napoca, Romania)

 

Sat, May 27
9:00 - 11:00

Room 367

Session S7 - sII-2
Software Applications

Chairs
Iulian Birou, Honoriu Valean, Teodora Sanislav

S7-sII-2-1

An Improved Method for Automatic Classification of Speech
Al.Caruntu, A.Nica, G.Toderean, E.Puschita, O. Buza, (Technical
University of Cluj-Napoca, Romania)

S7-sII-2-2

Matlab Graphical Interface for the DSK243 system used to control a BLDC Motor
C. Rusu, I. Birou, (
Technical University of Cluj-Napoca, Romania)

S7-sII-2-3

Polymer Electrolyte Fuel Cell System (PEFC), Performance Analysis
1R. Tirnovan, 2A. Miraoui, 1R. Munteanu, 1I. Vadan, 1H. Balan, (
1Technical University of Cluj-Napoca, 2University of Technology of Belfort-Montbéliard, France)

S7-sII-2-4

Multi-agent and Intelligent Agents’ Techniques Implemented in a Control and Supervisory Telematic System
1I. Stoian, 1T. Sanislav, 1D. Capatina, 2L. Miclea, 2H. Valean, 2S. Enyedi, (1IPA – R&D Institute for Automation, Cluj Subsidiary, 2Technical
University of Cluj-Napoca, Romania)

S7-sII-2-5

Supervisory and Control System for Thermal Treating Processes
1S. Ignat, 1I. Stoian, 1R. Meza, 1E. Stancel, 2R. Balan, ( 1 IPA – R&D Institute for Automation, Cluj Subsidiary, 2 Technical University of
Cluj-Napoca, Romania)

S7-sII-2-6

Multi-Resolution Analysis, Numerical Methods and Reverse Dynamics, Integrated in Software Instruments for Performance Improving in the Satellite Remote Sensing
1P.Mitrea, 2Al.Imbroane, 1Al.I.Mitrea, 3M.C. Anisiu, (
1Technical University Cluj-Napoca, 2Babes-Bolyai University Cluj-Napoca, 3T. Popoviciu Mathematics Institute- Romanian Academy Branch of Cluj-Napoca, Romania) 

S7-sII-2-7

Web Applications-Globalization in .NET 1.1
L. Miclea, A. Gut, Sz. Enyedi, M. Abrudean, I. Hoka, (
Technical University of Cluj-Napoca, Romania)

 

Sat, May 27
11:00 - 11:30

Coffee break  

Sat, May 27
11:30 - 13:00   

Room 40

Plenary session II

Chairs: Liviu Miclea, Ioan Stoian

 Speakers

 

 

The Scaling Semiconductor World and Test Technology
Y. Zorian, (Virage Logic USA)

 

Self Healing Systems
P. Prinetto, (Politecnico di Torino)

 

Alternative Education in Computing and Information Technologies
M.-F. Vaida, (Technical
University of Cluj-Napoca, Romania)

 

Management of a Multi Agent Society used for Monitoring and Diagnosis in a Hydroelectric Power Plant Chain
1Sz. Enyedi, 1L. Miclea, 1H. Valean, 2I. Stoian, 1G. Toderean,  (1Technical
University of Cluj-Napoca, Romania, 2IPA – R&D Institute for Automation, Cluj Subsidiary)

Sat, May 27
13:30 - 15:00

Lunch 

Sat, May 27
16:00-Sun, May 28

Transylvanian trip (optional)